[1]刘翔,张洋*,李文定,等.含水率对胶合板热压传热的影响[J].林业工程学报,2013,27(01):32-34.
 LIU Xiang,ZHANG Yang,LI Wen ding,et al.Effects of moisture content on heat transfering during plywood during hotpressing[J].Journal of Forestry Engineering,2013,27(01):32-34.
点击复制

含水率对胶合板热压传热的影响
分享到:

《林业工程学报》[ISSN:1001-8081/CN:32-1160/S]

卷:
27
期数:
2013年01期
页码:
32-34
栏目:
应用研究
出版日期:
2013-01-25

文章信息/Info

Title:
Effects of moisture content on heat transfering during plywood during hotpressing
作者:
刘翔张洋*李文定贾翀
南京林业大学木材工业学院,南京 210037
Author(s):
LIU Xiang ZHANG Yang LI Wending JIA Chong
College of Wood Science & Technology, Nanjing Forestry University, Nanjing 210037, China
关键词:
胶合板含水率导热系数传热
Keywords:
plywood moisture content thermal conductivity hot pressing
摘要:
为了研究初含水率对杨木胶合板板坯的导热性能以及对热压传热过程的影响,采用准稳态法测试了不同含水率条件下施胶杨木胶合板坯的导热系数,并进行了热压工艺试验。结果表明,随着板坯含水率从10%增加到22%,板坯的导热系数明显增加;胶合板热压传热过程可以分为快速升温和慢速升温两个阶段,在快速升温阶段芯层升温速率随着板坯初含水率的提高而递增,在慢速升温阶段初含水率对芯层升温速率基本没有影响。
Abstract:
In order to investigate the effect of moisture content on the thermal conductivity and heat transfer during hot pressing of plywood, the quasi steady method was applied to measure the thermal conductivity of the resinated plywood assembly with different moisture contents during hot pressing. The results showed that with moisture content increased from 10% to 20% , the thermal conductivity increased significantly, and that plywood hot pressing can be divided into fast heating and slow heating phases. During the first phase the heating rate of the core layer rised with the increase of moisture content while during the second phase the impact of moisture content on the heating rate of the core layer could be ignored.

参考文献/References:

[1]刘正添,王洁英,于辉.影响刨花板热压传热过程因素的研究[J].北京林业大学学报,1995,17(2):64-72.
[2]谢力生,喻云水,曹建文,等.常规热压法无胶干法纤维板热压传热研究[J].林产工业,2003,30(1):26-28.
[3]黎爱纯.中密度纤维板导热系数的测定[J].林产工业,1997,24(2):27-30.
[4]Yang Q X. Theoretical expressions of thermal conductivity of wood [J]. Journal of Forestry Research, 2001,12(1):43-46.
[5]雷亚芳.板坯含水率对刨花板热压过程中传热的影响[J].木材工业,2006,20(6):20-22.
[6]徐长妍,华毓坤.喷蒸真空热压刨花板板坯内部的温度场特性[J].林产工业,2002,29(6):13-15.
[7]Zombori B G, Kamke F A, Watson L T. Simulation of the internal conditions during the hot pressing process [J]. Wood and Fiber Science, 2003,35(1):2-23.
[8]徐信武,徐德良,刘翔,等.液态UF树脂/木质单元复合板坯的常温导热系数[J].南京林业大学学报:自然科学版,2012,36(1):119-123.
[9]章熙民,任泽霈.传热学[M].4版.北京:中国建筑工业出版社,2001:12-13.
[10]谢拥群,杨庆贤,陈瑞英,等.木材刨花干燥中横纹热导率的研究[J].干燥技术与设备,2004(2):22-26
[11]杨庆贤.木材热学性质的理论研究-木材导热系数与导温系数[J].福建林学院学报,1992,12(2):182-188.

相似文献/References:

[1]梅长彤,周定国.玻璃纤维增强杨木混凝土模板用胶合板研究[J].林业工程学报,2009,23(06):79.
 MEI Changtong,ZHOU Dingguo.Study on Glass Fiber Reinforced Poplar Plywood Used for Concrete Form[J].Journal of Forestry Engineering,2009,23(01):79.
[2]王超,高红真,程顺,等.塞罕坝林区森林可燃物含水率及火险预报[J].林业工程学报,2009,23(03):59.
 WANG Chao,GAO Hong zhen,CHENG Shun,et al.Study on Water Content of Forest Fuel and Forest Fire Risk Prediction in Saihanba Forest Area[J].Journal of Forestry Engineering,2009,23(01):59.
[3]刘艳萍,张洋*,章昕,等.豆胶染色杨木胶合板的工艺及性能[J].林业工程学报,2009,23(04):95.
 LIU Yan ping,ZHANG Yang,ZHANG Xin,et al.Study of the Manufacturing Process and Properties of Dyed Poplar Plywood with Soybean Adhesive[J].Journal of Forestry Engineering,2009,23(01):95.
[4]董丽君,黄河浪*,赵明,等.不同含水率条件下竹材热处理内部温度变化规律[J].林业工程学报,2011,25(04):29.
 DONG Li jun,HUANG He lang,ZHAO Ming,et al.Influence of moisture content on internal temperature change of thermally treated bamboo[J].Journal of Forestry Engineering,2011,25(01):29.
[5]高伟,罗建举*,屈春意.甲醛捕捉剂在胶合板涂饰中的应用[J].林业工程学报,2013,27(01):89.
 GAO Wei,LUO Jian ju,QU Chun yi.The application of formaldehyde scavenger in surface coating of plywood[J].Journal of Forestry Engineering,2013,27(01):89.
[6]成发勇,刘佩英,姜志宏*,等.木材窑干过程含水率实时在线检测技术述评[J].林业工程学报,2013,27(04):7.
[7]王锦涛,金菊婉*,过菁,等.真空-加压防腐处理对胶合板性能的影响[J].林业工程学报,2014,28(01):59.
 WANG Jin-tao,JIN Ju-wan,GUO Jing,et al.The influences of vacuum-pressure preservative treatment on properties of plywood[J].Journal of Forestry Engineering,2014,28(01):59.
[8]龚迎春,殷志伟,李晓平,等.不同阻燃剂对胶合板胶合强度和燃烧性能影响[J].林业工程学报,2014,28(02):99.
 GONG Yingchun,YIN Zhiwei,LI Xiaoping,et al.Effects of flame retardants on bonding strength and combustion performance of plywood[J].Journal of Forestry Engineering,2014,28(01):99.
[9]卢晓宁,华毓坤,叶小青,等.杨木单板出材率调查[J].林业工程学报,2000,14(04):24.
[10]吴羽飞,顾海英.枫木胶合板的实验室制造工艺[J].林业工程学报,2004,18(05):27.

备注/Memo

备注/Memo:
收稿日期:2012-09-06修回日期:2012-10-21 基金项目:“十二五”国家科技支撑计划“胶合板生产干燥节能技术”(编号:2012BAD24B0304);苏北科技发展计划——科技型企业技术创新项目(编号:BC2011422)。 作者简介:刘翔(1977-),男,实验师,博士生,研究方向为人造板工艺。通讯作者:张洋,男,教授。Email:yangzhang31@126.com
更新日期/Last Update: 2013-02-15