Home >> News browse
Instruction
Release people:administrator Release time:10/28/2016 8:40:33 AM Browse the number:67301
【Font: Font color


Journal of Forestry Engineeringis an academic journal,sponsored by Nanjing Forestry University,started publishing bimonthly in both mainland and abroad in 2016.The journal publishes original research papers, review articles, research reports, academic activities, and so on. The journal mainly coverswood science and technology, chemical processing of forest products, biomass energy and material, forestry equipment and the information, forest engineering and traffic and civil engineering, and furniture design and manufacturing, etc.Papers both in Chinese and in English can be accepted for publication.

1 Manuscript specific requirements
1.1 Basic requirements
The paper should be original, innovative, scientific, logical and readable.It should be at least the provincial fund projects, and non-funded projects are not accepted. The number of words in the paper is suitable for 5000–8000 words.
1.2Title and by-line
Name, affiliation (institution) of the author(s), city, zip code, country, and email address of the author(s) should be given.
1.3 Author (note on the front page of the paper)
Fund project. The first author: name, gender, degree, research direction. The correspondence author: name, gender, title, E-mail.
1.4Abstractand Key words
About 300 words should outline the objective, method, main results, and conclusion without mathematical, equations, or cited marks.
Provide 3 to 6 key words or phrases for cross-indexing this article.
1.5 Introduction
The introduction of the paper is not numbered. Text should be as concise, similar to previous research data briefly summarized and marked references, leads to the necessity and importance of the study, proposed to solve the problem. The preamble should be less segmented, figures, tables, formulas and formulas, which do not appear.
1.6 Level marked text
The title should be short, clear, at all levels be numbered consecutively in Arabic numerals, between different levels by the following figures separated by a dot, the last figure back without punctuation, such as: "1"; "2.1"; "3.1.2", will be the top left cell.
1.7 Units
The foreign language and symbols of the demanded to distinguish between languages, italics, and corner and, lowercase, plants and microorganisms name first appeared in the text shall be filled with Latin names (in italics). Unit of measurement and symbols in accordance with the provisions of GB 3100-3102-1993 execution has been abolished in the units may not be used, such as: mesh, mole, molarity (M), equivalent concentration (N), millimeters of mercury (mmHg), Diane (dyn), kilogram force (kgf), standard atmosphere (atm), calories (cal), industry unit need converted using standard unit. In the body of the formula: variables are in italics, Roman units, is the traditional digital.
1.8 Table and Figure
The figures and tables in the text should be insert in the desired position. Form and content should be checked carefully to minimize the need for corrections in the proofs. Number tables consecutively as they are mentioned in the text, and refer to them actively, rather than parenthetically, when the first time they are discussed. Provide a concise title for each table, and label each column with an unambiguous heading. If footnotes are needed for clarity, designate them with lowercase letters in the order in which they are referenced in the table.
Submit figures that are professionally prepared. Figures should be unambiguous, as conceptual as possible, and provide enough information so that the reader can understand them without significant input from the text. Provide a short title for each figure. In line drawing, all lines should be of uniform thickness, letters and numbers should be of professional quality and proper dimensions. Computer drawings are acceptable provided if they are of comparable quality to line drawings and suitable for reproduction. Lines (or curves) and symbols must be drawn boldly enough to stand reduction to the desired size. Figure legends should be concise and descriptive, and should not repeat information presented in the text.
Photographs should exhibit high contrast. Irregular and asymmetrically distributed group of photographs will not be accepted: it is always possible by adjusting to produce a pleasing layout.
Once the manuscript is accepted, please save all the pictures in the text to EPS format and send it to the lygcxb@vip.163.com.
1.9. References
The references should be numbered in the order of the first appearance in the text and every reference should be identified properly at where it is cited. Chinese Papers references (including dissertations) need to add bilingual literature except no English title. The reference number of research papers should be at least 15, review articles more than 30, and have a certain proportion of foreign literature.
The format of the references is according tothe provisions of GB/T 7714-2015, the sequence coding system. References in the text at the top right corner brackets marked document number.
Thelist is as follows:
Journal articles:
Author 1, Author 2, Author 3, et al. Title of the article[J]. The Title of Journal, Year of publication,Volume No.(Issue No.):Start-end page numbers.
Books:
Author 1, Author 2, Author 3, et al. Title of the book[M]. Version, City where the book published:Publisher, Year of the publication:Start-end page numbers.
Proceedings:
Author 1, Author 2, Author 3, et al. Title of the article[C]//. Editor's name.City where the conference held:Publisher, Year of the publication:Start-end page numbers.
Patents:
Author 1, Author 2, et al. Title: Country, Patent Number[P].Date of issue.
Web Articles:
Author 1, Author 2, Author 3, et al.Title of the article[Document type identification]. City where the article published: Publisher, Year of the publication. downloading website.
The name of authors : the full family name first and the first letter uppercasing, the given name only with the capital letter, for example " Thomas Alva Edison " written as "Edison T A".
2 Contribution agreement
2.1 Using the online submissions for review, http://lkkf.njfu.edu.cn. After the success of submission, please feel free to log on the website, in the "Authors Contribution Manuscripts" view manuscript status. The results of the manuscript will be communicated to the author within 3 months.
2.2 The manuscripts were reviewed by the editorial department and passed the scientific misconduct of the sci-tech periodicals (the repetition rate was not more than 15%). The editorial department then sent the experts back to the author for review. The manuscript should be revised according to the comments of the reviewer and the editorial department and be repaired within the specified time. The revised manuscripts shall be unified and edited by the editorial board after final examination. (Once a manuscript has been issued, no modification or alteration of the author's signature shall be allowed, and the addition or deletion of the manuscript shall not be permitted. After the manuscript is finalized, the author will be asked to pay the layout fee. Once the manuscript has been published, the manuscript will be remitted and two samples will be presented.
2.3 The editorial department has the right to make the technical and text modification, but the substantive content of the amendment must obtain the author's consent.
2.4 If the author does not agree with the article into the relevant database, please declare in the manuscript, this print will do the appropriate treatment.

Title:
Username:
Verification code:
Comment on content: